I just today formatted my MOX with the latest TOS 5.0.4 as I was happy to finally be able to make use of the SDIO-WiFi but got disentchanted right after setting up the first SSID: it won’t come up (right like on TOS 4.x versions).
Here’s the
kernel log
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.187 (beast@slave10) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 2ca5a38)) #0 SMP Tue Jul 21 23:10:07 2020
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: CZ.NIC Turris Mox Board
[ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
[ 0.000000] bootconsole [ar3700_uart0] enabled
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 2048 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x494 with crng_init=0
[ 0.000000] percpu: Embedded 16 pages/cpu s26648 r8192 d30696 u65536
[ 0.000000] pcpu-alloc: s26648 r8192 d30696 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] Kernel command line: earlyprintk console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 mangled_fs=btrfs root=PARTUUID=2b574498-01 rootflags=commit=5,subvol=@ rootwait rw cfg80211.freg=
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Memory: 496508K/524288K available (7294K kernel code, 468K rwdata, 1900K rodata, 320K init, 304K bss, 27780K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80087a0000 ( 7296 KB)
[ 0.000000] .rodata : 0xffffff80087a0000 - 0xffffff8008980000 ( 1920 KB)
[ 0.000000] .init : 0xffffff8008980000 - 0xffffff80089d0000 ( 320 KB)
[ 0.000000] .data : 0xffffff80089d0000 - 0xffffff8008a45008 ( 469 KB)
[ 0.000000] .bss : 0xffffff8008a45008 - 0xffffff8008a911b0 ( 305 KB)
[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf00800000 ( 8 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
[ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
[ 0.008422] Console: colour dummy device 80x25
[ 0.012935] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000)
[ 0.023581] pid_max: default: 32768 minimum: 301
[ 0.028429] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.035169] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.043415] ASID allocator initialised with 32768 entries
[ 0.048995] Hierarchical SRCU implementation.
[ 0.053858] smp: Bringing up secondary CPUs ...
[ 0.058817] Detected VIPT I-cache on CPU1
[ 0.058847] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
[ 0.058878] CPU1: Booted secondary processor [410fd034]
[ 0.058965] smp: Brought up 1 node, 2 CPUs
[ 0.079672] SMP: Total of 2 processors activated.
[ 0.084519] CPU features: detected: GIC system register CPU interface
[ 0.091140] CPU features: detected: 32-bit EL0 Support
[ 0.096438] CPU: All CPU(s) started at EL2
[ 0.100650] alternatives: patching kernel code
[ 0.105906] devtmpfs: initialized
[ 0.111372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.121473] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.127825] xor: measuring software checksum speed
[ 0.232727] 8regs : 1918.800 MB/sec
[ 0.332763] 8regs_prefetch: 1710.400 MB/sec
[ 0.432800] 32regs : 2358.800 MB/sec
[ 0.532835] 32regs_prefetch: 1984.400 MB/sec
[ 0.537502] xor: using function: 32regs (2358.800 MB/sec)
[ 0.543069] pinctrl core: initialized pinctrl subsystem
[ 0.549183] NET: Registered protocol family 16
[ 0.554816] cpuidle: using governor ladder
[ 0.559093] vdso: 2 pages (1 code @ ffffff80087a5000, 1 data @ ffffff80089d4000)
[ 0.566663] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.573906] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.581416] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 9, base_baud = 0) is a mvebu-uart
[ 0.590362] console [ttyMV0] enabled
[ 0.597663] bootconsole [ar3700_uart0] disabled
[ 0.787207] raid6: int64x1 gen() 320 MB/s
[ 0.957296] raid6: int64x1 xor() 317 MB/s
[ 1.127340] raid6: int64x2 gen() 518 MB/s
[ 1.297393] raid6: int64x2 xor() 449 MB/s
[ 1.467490] raid6: int64x4 gen() 782 MB/s
[ 1.637584] raid6: int64x4 xor() 550 MB/s
[ 1.807607] raid6: int64x8 gen() 939 MB/s
[ 1.977680] raid6: int64x8 xor() 561 MB/s
[ 2.147839] raid6: neonx1 gen() 594 MB/s
[ 2.317866] raid6: neonx1 xor() 624 MB/s
[ 2.487963] raid6: neonx2 gen() 986 MB/s
[ 2.657994] raid6: neonx2 xor() 943 MB/s
[ 2.828100] raid6: neonx4 gen() 1313 MB/s
[ 2.998148] raid6: neonx4 xor() 1166 MB/s
[ 3.168228] raid6: neonx8 gen() 1297 MB/s
[ 3.338304] raid6: neonx8 xor() 1131 MB/s
[ 3.342446] raid6: using algorithm neonx4 gen() 1313 MB/s
[ 3.347930] raid6: .... xor() 1166 MB/s, rmw enabled
[ 3.353419] raid6: using neon recovery algorithm
[ 3.358937] SCSI subsystem initialized
[ 3.363127] libata version 3.00 loaded.
[ 3.363349] usbcore: registered new interface driver usbfs
[ 3.369055] usbcore: registered new interface driver hub
[ 3.374189] usbcore: registered new device driver usb
[ 3.380157] pxa2xx-i2c d0011000.i2c: could not find pctldev for node /soc/internal-regs@d0000000/pinctrl@13800/i2c1-pins, deferring probe
[ 3.394286] clocksource: Switched to clocksource arch_sys_counter
[ 3.407402] NET: Registered protocol family 2
[ 3.411998] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.419176] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 3.425937] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.432156] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.438201] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.444791] NET: Registered protocol family 1
[ 3.449168] PCI: CLS 0 bytes, default 128
[ 3.449813] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 3.461943] Crashlog allocated RAM at address 0x3f00000
[ 3.468082] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 3.478479] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.484573] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 3.497518] io scheduler noop registered
[ 3.501312] io scheduler deadline registered (default)
[ 3.609881] OF: PCI: host bridge /soc/pcie@d0070000 ranges:
[ 3.615499] OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
[ 3.621769] OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000
[ 4.124283] advk-pcie d0070000.pcie: link up
[ 4.128853] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
[ 4.135178] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 4.140914] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
[ 4.147668] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
[ 4.157792] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 4.157882] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 4.157975] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 4.158159] pci 0000:00:00.0: supports D1 D2
[ 4.158304] pci 0000:00:00.0: BAR 0: assigned [mem 0xe8000000-0xe81fffff 64bit]
[ 4.165906] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8200000-0xe820ffff pref]
[ 4.174535] mv_xor d0060900.xor: Marvell shared XOR driver
[ 4.234868] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 4.304872] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 4.312539] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 4.321166] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 4.331654] loop: module loaded
[ 4.341496] random: fast init done
[ 4.349825] m25p80 spi0.0: w25q64dw (8192 Kbytes)
[ 4.354596] 5 fixed-partitions partitions found on MTD device spi0.0
[ 4.361250] Creating 5 MTD partitions on "spi0.0":
[ 4.366223] 0x000000000000-0x000000020000 : "secure-firmware"
[ 4.372658] 0x000000020000-0x000000180000 : "u-boot"
[ 4.378476] 0x000000180000-0x000000190000 : "u-boot-env"
[ 4.384202] 0x000000190000-0x0000007f0000 : "Rescue system"
[ 4.390550] 0x0000007f0000-0x000000800000 : "dtb"
[ 4.396060] moxtet spi0.1: Found SD Turris Mox CPU module
[ 4.401651] moxtet spi0.1: PCIe module found
[ 4.406769] libphy: Fixed MDIO Bus: probed
[ 4.411378] libphy: orion_mdio_bus: probed
[ 4.417765] mvneta d0030000.ethernet eth0: Using device tree mac address d8:58:d7:00:c8:78
[ 4.426408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.433078] ehci-pci: EHCI PCI platform driver
[ 4.437388] ehci-platform: EHCI generic platform driver
[ 4.442902] ehci-orion: EHCI orion driver
[ 4.447378] orion-ehci d005e000.usb: EHCI Host Controller
[ 4.452618] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
[ 4.460723] orion-ehci d005e000.usb: irq 12, io mem 0xd005e000
[ 4.494291] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
[ 4.500875] hub 1-0:1.0: USB hub found
[ 4.504540] hub 1-0:1.0: 1 port detected
[ 4.509731] usbcore: registered new interface driver usb-storage
[ 4.516063] i2c /dev entries driver
[ 4.520298] armada_37xx_wdt d0008300.watchdog: Initial timeout 120 sec
[ 4.527477] sdhci: Secure Digital Host Controller Interface driver
[ 4.533606] sdhci: Copyright(c) Pierre Ossman
[ 4.538078] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.544301] xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
[ 4.550002] xenon-sdhci d00d8000.sdhci: Got CD GPIO
[ 4.556774] NET: Registered protocol family 10
[ 4.561975] Segment Routing with IPv6
[ 4.565673] NET: Registered protocol family 17
[ 4.569939] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.583695] 8021q: 802.1Q VLAN Support v1.8
[ 4.589928] Btrfs loaded, crc32c=crc32c-arm64-ce
[ 4.598670] rtc-ds1307 0-006f: registered as rtc0
[ 4.603232] i2c i2c-0: PXA I2C adapter
[ 4.607533] xhci-hcd d0058000.usb: xHCI Host Controller
[ 4.612779] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
[ 4.620293] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x0000000000010010
[ 4.629816] xhci-hcd d0058000.usb: irq 11, io mem 0xd0058000
[ 4.636189] hub 2-0:1.0: USB hub found
[ 4.640100] hub 2-0:1.0: 1 port detected
[ 4.644316] xhci-hcd d0058000.usb: xHCI Host Controller
[ 4.649462] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
[ 4.657313] xhci-hcd d0058000.usb: Host supports USB 3.0 SuperSpeed
[ 4.664010] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.672842] hub 3-0:1.0: USB hub found
[ 4.676686] hub 3-0:1.0: 1 port detected
[ 4.681025] xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
[ 4.744292] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
[ 4.751941] xenon-sdhci d00d8000.sdhci: Got CD GPIO
[ 4.797529] sdio_read_cccr card report SDIO_UHS_DDR50
[ 4.802580] sdio_read_cccr card report SDIO_UHS_SDR50
[ 4.807898] sdio_read_cccr card report SDIO_UHS_SDR104
[ 4.814478] mmc1: SDHCI controller on d00d8000.sdhci [d00d8000.sdhci] using ADMA
[ 4.824569] armada-37xx-rwtm-mailbox d00b0000.mailbox: Trust Status: 00000000
[ 4.934584] Turris Mox serial number 0000000D3000755E
[ 4.939634] board version 22
[ 4.943314] burned RAM size 512 MiB
[ 5.264601] random: crng init done
[ 5.268052] rtc-ds1307 0-006f: setting system clock to 2020-08-13 15:09:05 UTC (1597331345)
[ 5.396272] Waiting for root device PARTUUID=2b574498-01...
[ 5.407939] xenon-sdhci d00d0000.sdhci: Timing issue might occur in DDR mode
[ 5.429289] mmc0: new ultra high speed DDR50 SDIO card at address 0001
[ 5.445334] mmc1: new ultra high speed DDR50 SDHC card at address 0007
[ 5.452534] mmcblk1: mmc1:0007 SD8GB 7.42 GiB
[ 5.459038] mmcblk1: p1
[ 5.498343] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 5.506062] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 1th superblock
[ 5.515342] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 5.522466] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 2th superblock
[ 5.530449] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 5.538152] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 1th superblock
[ 5.545785] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 5.553156] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 2th superblock
[ 5.562501] BTRFS: device label turris devid 1 transid 60 /dev/root
[ 5.570871] BTRFS info (device mmcblk1p1): disk space caching is enabled
[ 5.577861] BTRFS info (device mmcblk1p1): has skinny extents
[ 5.608148] BTRFS info (device mmcblk1p1): enabling ssd optimizations
[ 5.624413] VFS: Mounted root (btrfs filesystem) on device 0:12.
[ 5.632387] devtmpfs: mounted
[ 5.635364] Freeing unused kernel memory: 320K
[ 5.751987] init: Console is alive
[ 5.755737] init: - watchdog -
[ 6.303280] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.323674] usbcore: registered new interface driver uas
[ 6.329094] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.346845] init: - preinit -
[ 6.784879] mvneta d0030000.ethernet eth0: PHY [d0032004.mdio-mii:01] driver [Marvell 88E1510]
[ 6.794160] mvneta d0030000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 6.804740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.928627] mount_root: mounting /dev/root
[ 11.095564] mvneta d0030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 11.103963] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.792600] BTRFS info (device mmcblk1p1): disk space caching is enabled
[ 13.411045] mvneta d0030000.ethernet eth0: Link is Down
[ 13.427597] procd: - early -
[ 13.430644] procd: - watchdog -
[ 14.101584] procd: - watchdog -
[ 14.105520] procd: - ubus -
[ 14.166248] procd: - init -
[ 14.290679] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.312949] zram: Added device: zram0
[ 14.324530] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 14.339032] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.349491] Netfilter messages via NETLINK v0.30.
[ 14.356354] ip_set: protocol 6
[ 14.383511] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 14.391532] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 14.429267] hidraw: raw HID events driver (C) Jiri Kosina
[ 14.438246] Mirror/redirect action on
[ 14.450332] u32 classifier
[ 14.452876] input device check on
[ 14.456774] Actions configured
[ 14.466870] sch_cake: Unknown symbol nf_conntrack_find_get (err 0)
[ 14.473314] sch_cake: Unknown symbol nf_ct_get_tuplepr (err 0)
[ 14.532895] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 14.539829] ath10k_pci 0000:00:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.777827] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 14.789043] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 14.944654] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 14.953839] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 14.964659] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 14.979814] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 14.989674] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 15.000837] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 15.016119] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 15.037234] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 15.046840] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 15.060968] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 15.106821] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 15.117566] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 15.132878] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 15.143493] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 16.301713] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 16.426644] ath: EEPROM regdomain: 0x0
[ 16.426656] ath: EEPROM indicates default country code should be used
[ 16.426661] ath: doing EEPROM country->regdmn map search
[ 16.426672] ath: country maps to regdmn code: 0x3a
[ 16.426678] ath: Country alpha2 being used: US
[ 16.426684] ath: Regpair used: 0x3a
[ 16.452564] Bluetooth: Core ver 2.22
[ 16.456380] NET: Registered protocol family 31
[ 16.460990] Bluetooth: HCI device and connection manager initialized
[ 16.467211] Bluetooth: HCI socket layer initialized
[ 16.472450] Bluetooth: L2CAP socket layer initialized
[ 16.477843] Bluetooth: SCO socket layer initialized
[ 16.484525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.489865] Bluetooth: BNEP filters: protocol multicast
[ 16.495140] Bluetooth: BNEP socket layer initialized
[ 16.502606] Bridge firewalling registered
[ 16.512593] Bluetooth: vendor=0x2df, device=0x9142, class=255, fn=2
[ 18.118205] Bluetooth: FW download over, size 623240 bytes
[ 18.354601] sdio platform data not available
[ 18.365404] usbcore: registered new interface driver btusb
[ 18.386999] Ebtables v2.0 registered
[ 18.391901] Bluetooth: HCI UART driver ver 2.3
[ 18.396412] Bluetooth: HCI UART protocol H4 registered
[ 18.401733] Bluetooth: HCI UART protocol BCSP registered
[ 18.407062] Bluetooth: HCI UART protocol ATH3K registered
[ 18.414179] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 18.420401] Bluetooth: HIDP socket layer initialized
[ 18.427784] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.456122] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 18.467531] ctnetlink v0.93: registering with nfnetlink.
[ 18.506187] Bluetooth: RFCOMM TTY layer initialized
[ 18.511127] Bluetooth: RFCOMM socket layer initialized
[ 18.516540] Bluetooth: RFCOMM ver 1.11
[ 18.524640] usbcore: registered new interface driver ums-alauda
[ 18.532088] usbcore: registered new interface driver ums-cypress
[ 18.539128] usbcore: registered new interface driver ums-datafab
[ 18.546179] usbcore: registered new interface driver ums-freecom
[ 18.553154] usbcore: registered new interface driver ums-isd200
[ 18.560344] usbcore: registered new interface driver ums-jumpshot
[ 18.567502] usbcore: registered new interface driver ums-karma
[ 18.574358] usbcore: registered new interface driver ums-sddr09
[ 18.581199] usbcore: registered new interface driver ums-sddr55
[ 18.587465] mwifiex_sdio mmc0:0001:1: WLAN is not the winner! Skip FW dnld
[ 18.596195] usbcore: registered new interface driver ums-usbat
[ 18.647877] xt_time: kernel timezone is -0000
[ 18.672307] PPP generic driver version 2.4.2
[ 18.678276] NET: Registered protocol family 24
[ 18.699173] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.954654] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 18.990351] mwifiex_sdio mmc0:0001:1: Unknown api_id: 3
[ 18.995741] mwifiex_sdio mmc0:0001:1: Unknown api_id: 4
[ 19.001000] mwifiex_sdio mmc0:0001:1: Unknown GET_HW_SPEC TLV type: 0x217
[ 19.029909] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p197)
[ 19.038249] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (16.68.1.p197)
[ 19.261560] zram0: detected capacity change from 0 to 253755392
[ 19.278743] Adding 247804k swap on /dev/zram0. Priority:-2 extents:1 across:247804k SS
[ 21.514733] mvneta d0030000.ethernet eth0: PHY [d0032004.mdio-mii:01] driver [Marvell 88E1510]
[ 21.524571] mvneta d0030000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 21.532619] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.541494] mvneta d0030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 21.543279] br-gast: port 1(eth0.5) entered blocking state
[ 21.555165] br-gast: port 1(eth0.5) entered disabled state
[ 21.561441] device eth0.5 entered promiscuous mode
[ 21.566297] device eth0 entered promiscuous mode
[ 21.571662] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.586490] br-gast: port 1(eth0.5) entered blocking state
[ 21.592212] br-gast: port 1(eth0.5) entered forwarding state
[ 21.598063] IPv6: ADDRCONF(NETDEV_UP): br-gast: link is not ready
[ 21.768199] br-iot: port 1(eth0.2) entered blocking state
[ 21.773818] br-iot: port 1(eth0.2) entered disabled state
[ 21.783976] device eth0.2 entered promiscuous mode
[ 21.797084] br-iot: port 1(eth0.2) entered blocking state
[ 21.802606] br-iot: port 1(eth0.2) entered forwarding state
[ 22.062338] br-lan: port 1(eth0.1) entered blocking state
[ 22.067967] br-lan: port 1(eth0.1) entered disabled state
[ 22.076993] device eth0.1 entered promiscuous mode
[ 22.087523] br-lan: port 1(eth0.1) entered blocking state
[ 22.092982] br-lan: port 1(eth0.1) entered forwarding state
[ 22.614500] IPv6: ADDRCONF(NETDEV_CHANGE): br-gast: link becomes ready
[ 22.698456] mvneta d0030000.ethernet eth0: Link is Down
[ 22.873390] ath: EEPROM regdomain: 0x8114
[ 22.877503] ath: EEPROM indicates we should expect a country code
[ 22.883685] ath: doing EEPROM country->regdmn map search
[ 22.889408] ath: country maps to regdmn code: 0x37
[ 22.894115] ath: Country alpha2 being used: DE
[ 22.898917] ath: Regpair used: 0x37
[ 22.902493] ath: regdomain 0x8114 dynamically updated by user
[ 23.656846] br-lan: port 1(eth0.1) entered disabled state
[ 23.674436] br-iot: port 1(eth0.2) entered disabled state
[ 23.686974] br-gast: port 1(eth0.5) entered disabled state
[ 23.977257] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x20 error, result=0x1
[ 24.775492] mvneta d0030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 26.522545] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[ 26.545445] IPv6: ADDRCONF(NETDEV_UP): wifi5lan: link is not ready
[ 26.558527] br-lan: port 1(eth0.1) entered blocking state
[ 26.563962] br-lan: port 1(eth0.1) entered forwarding state
[ 26.570050] br-iot: port 1(eth0.2) entered blocking state
[ 26.575270] br-iot: port 1(eth0.2) entered forwarding state
[ 26.581383] br-gast: port 1(eth0.5) entered blocking state
[ 26.587071] br-gast: port 1(eth0.5) entered forwarding state
[ 26.596587] IPv6: ADDRCONF(NETDEV_UP): wifi2lan: link is not ready
[ 26.606071] br-lan: port 2(wifi5lan) entered blocking state
[ 26.611865] br-lan: port 2(wifi5lan) entered disabled state
[ 26.617929] device wifi5lan entered promiscuous mode
[ 26.645533] br-lan: port 3(wifi2lan) entered blocking state
[ 26.650972] br-lan: port 3(wifi2lan) entered disabled state
[ 26.657199] device wifi2lan entered promiscuous mode
[ 26.662427] br-lan: port 3(wifi2lan) entered blocking state
[ 26.668014] br-lan: port 3(wifi2lan) entered forwarding state
[ 28.564485] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0xb1 error, result=0x1
[ 28.571558] mwifiex_sdio mmc0:0001:1: Failed to start the BSS
[ 28.577442] mwifiex_sdio mmc0:0001:1: Failed to start AP
[ 28.583438] br-lan: port 3(wifi2lan) entered disabled state
[ 28.724602] device wifi2lan left promiscuous mode
[ 28.729630] br-lan: port 3(wifi2lan) entered disabled state
[ 90.271732] br-lan: port 2(wifi5lan) entered blocking state
[ 90.277785] br-lan: port 2(wifi5lan) entered forwarding state
and the
wifi settings
config wifi-device ‘radio0’
option type ‘mac80211’
option macaddr ‘04:f0:21:24:1c:75’
option disabled ‘0’
option hwmode ‘11a’
option txpower ‘20’
option channel ‘100’
option legacy_rates ‘0’
option country ‘DE’
option htmode ‘VHT80’config wifi-iface ‘default_radio0’
option device ‘radio0’
option network ‘lan’
option mode ‘ap’
option encryption ‘psk2+ccmp’
option wpa_group_rekey ‘86400’
option key ‘12345678’
option disabled ‘0’
option ft_over_ds ‘1’
option ifname ‘wifi5lan’
option wpa_disable_eapol_key_retries ‘1’
option mobility_domain ‘xyxa’
option ft_psk_generate_local ‘1’
option ieee80211r ‘1’
option ssid ‘SSID1’
config wifi-device ‘radio1’
option type ‘mac80211’
option macaddr ‘d0:c5:d3:33:dd:f1’
option disabled ‘0’
option hwmode ‘11g’
option txpower ‘20’
option channel ‘1’
option noscan ‘1’
option legacy_rates ‘0’
option htmode ‘HT40’
option country ‘DE’config wifi-iface ‘default_radio1’
option device ‘radio1’
option network ‘lan’
option mode ‘ap’
option disabled ‘0’
option encryption ‘psk2+ccmp’
option wpa_group_rekey ‘86400’
option key ‘12345678’
option ft_over_ds ‘1’
option ifname ‘wifi2lan’
option ssid ‘OpenWrt’
option wpa_disable_eapol_key_retries ‘1’
option mobility_domain ‘xyxa’
option ft_psk_generate_local ‘1’
option ieee80211r ‘1’
radio0 is a WLE900VX which works fine (just as on TOS 4.x).
By the way - luci still shows the SDIO-WiFi to be active:
@Pepe in my eyes this bug doesn’t seem to be fixed! I am not even able to use one single SSID on this card… Or is there any firmware upgrade procedure necessary for which pkgupdate is needed (as I reached 5.0.4 not by upgrading but reformatting my SD-card)?
And yet another bug (even though this might be an upstream and certainly harmless one):
Have a look into the luci-wireless screenshot above: The SSID1 is shown as not active/disabled even though one device is successfully connected.
And there is new other bug which I never saw bevor - when trying to have look into syslog via luci I get
This one occured after
- rebooting MOX → didn’t work (reboot bug)
- unplugging and after 30 seconds replugging the power plug
and seems to not disappear from itself. So question would be which file I need to create in order to get syslog back again?